Brand: RA&Sons

RAFIN is a cement based white ultra fine finish plaster fore the smoothing and finishing of interior and exterior walls and ceilings. RAFIN is easy to apply on all smooth cement and lime surfaces like RACEM GREY, RACEM WHITE and RAPERL.

Surface Preparation

All surfaces should be clean and free from dust, debris and surface contaminants like grease and oil.

Mixing And Application

RAFIN should be mixed with a paddle mixer. Mix in a clean bucket using approx 8-9 litres of clean water per 25kg bag. Mix the product until smoothg and then allow it to stand for 5 minutes, remix thoroughly and then the plaster is ready to apply.


  • Lightly wet the surface before application
  • Do not apply RAFIN at temperatures blow +5°C or above +35°C or in strong windy conditions
  • Apply each coat to a maximun depth of 1mm


Cement Based Fine Exterior Finish

Packaging & Storage

RAFIN is supplied in 25kg bags and can be stored up to 12 months in a cool dry place, in its unopened original packaging

Safety Notice

Before using RAFIN it is recommended to consult the product safety data sheet available on request

Technical Data

1350 Kg/m³
Theoretical Coverage
1 Kg/m²
Pot Life
2 hours
Compression Strength
Bending Strength
W c < 0,40 Kg/m² min½
Fire Resistance
classe A1
The data and statements in this information sheet refer to laboratory tests in our possession, conducted in standard environmental conditions. Practical applications on site according to these conditions of use may result in different data readings. Due to the wide variety of possible uses and applications, the end-users should independently determine the suitability of the material for their specific purpose prior to use. R.A. & SONS Manufacturing Ltd. reserves the right to make technical modifications of any kind without prior notice.

Other Products

© Copyright RA & Sons Ltd 2024