Rabond White Standard Tile Adhesive

Brand: RA&Sons

RABOND WHITE is a standard set cement based tile adhesive for ceramic and porcelain tiles. RABOND has a C1T classification making it easy to use with limited slip on walls and floors. It conforms to the European standard UNI EN 12004:2007.

Surface Preparation

The surface to be tiled must be completely sound and clean, dry and dust free. Any surface contaminants like grease, oil and efflorescence must be removed in order to promote adhesion.



RABOND WHITE should be mixed with a mechanical paddle mixer on a low speed setting to achieve a smooth and lump free consistency. Mix in a clean bucket using approximately 6-7 litres of clean water per 25Kg bag. Allow the mixture to stand for 5-6 minutes and then remix thoroughly before application. Use a notched trowel to apply the adhesive. Curing time is approximately 4-5 hours.



Do not use RABOND:

  • On surfaces that are wet.
  • When temperatures are below +5°C and over +35°C
  • On gypsum based boards and underfloor heating.


Cement Based Adhesive

Packaging & Storage

RABOND WHITE is supplied in 25Kg bags and can be stored up to 12 months in a cool dry place, in its original unopened packaging

Safety Notice

Before using RABOND WHITE it is recommended to consult the product safety data sheet available on request

Technical Data

1350 [Kg/m³]
<0.5 [mm]
Water To Be Mixed
26% Approx
Coverage (Theoretical)
4-5 [Kg/m²]
Full Cure
5 Days Approx
Time To Wait To Fill The Grouts
48 Hours
Pot Life
4-5 Hours Approx
Adjustability Time
30 Mins Approx
Cure Time
48 Hours
UNI EN 12004
Class C1T
Initial Tension Adhesion Strength
>0.5 [N/mm²] Mpa
Initial Adhesion Strength After Heat Aging
>0.5 [N/mm²] Mpa
Initial Adhesion Strength After Water Contact
>0.5 [N/mm²] Mpa
Initial Adhesion Strength After Freeze/Thaw Cycles
>0.5 [N/mm²] Mpa
The data and statements in this information sheet refer to laboratory tests in our possession, conducted in standard environmental conditions. Practical applications on site according to these conditions of use may result in different data readings. Due to the wide variety of possible uses and applications, the end-users should independently determine the suitability of the material for their specific purpose prior to use. R.A. & SONS Manufacturing Ltd. reserves the right to make technical modifications of any kind without prior notice.

Other Products

© Copyright RA & Sons Ltd 2024