Brand: RA&Sons

RABINDER is a granulated primer for smooth or low suction walls. The quartz particles adhere to difficult surfaces like chipboard, tiles and gypsum boards and provide a mechanical key ready for plaster or render. RABINDER is available in 1L, 5L and 20 L sizes.

Surface Preparation

All surfaces  should be sound, dust free and clear of any surface contaminants like oil, grease or salt efflorescence.



RABINDER must be stirred thoroughly to allow the quartz particles to be evenly distributed. Continuously stir during use. Apply RABINDER evenly to the substrate by spray or roller. Allow 12 hours to dry and 24 hours before plastering or rendering. Plastering or rendering must be achieved within 72 hours.



Do not use RABINDER

  • When temperatures are below +5°C and over +35°C
  • On surfaces with unstable or flaking paint

High Adhesive Primer For Very Smooth Surfaces

Packaging & Storage

RABINDER is supplied in 1Kg, 5Kg and 20Kg buckets and can be stored up to 6 months in a cool dry place, in its original unopened packaging

Safety Notice

Before using RABINDER it is recommended to consult the product safety data sheet available on request

Technical Data

1.32 [Kg/I]
Dry Touch Time
1-2 Hours
0.25 [Kg/m²] - stated values can be affected by the surface roughness and it's absorption
10% max with clean water (if necessary)
Volume Solid Content
65% <1
VOC According to dir 2004/42/CE primers (cat. A/g)
40 g/L
The data and statements in this information sheet refer to laboratory tests in our possession, conducted in standard environmental conditions. Practical applications on site according to these conditions of use may result in different data readings. Due to the wide variety of possible uses and applications, the end-users should independently determine the suitability of the material for their specific purpose prior to use. R.A. & SONS Manufacturing Ltd. reserves the right to make technical modifications of any kind without prior notice.

Other Products

© Copyright RA & Sons Ltd 2024