![](https://cdn.rasonsltd.com/wp-content/uploads/2022/10/ralastigum-st-antiroot-mockup.png?strip=all&lossy=1&quality=60&sharp=1&ssl=1)
Summer has finally arrived and now is the perfect time to tackle all of those mold patches that appeared during winter and spring.
Damp and mold usually thrives in rooms with high humidity like kitchens and bathrooms or it can plague external facing walls. Most people’s solution to the problem is to kill the mold with household bleach and repaint. Unfortunately, all that happens is that the mold lies dormant for awhile and then comes back with a vengeance. Black mold is not just unsightly, it’s been proven to cause respiratory problems, allergies and many other serious medical conditions.
So, before you treat the problem area try and cure the issue at it’s source by reducing humidity levels. In bathrooms or kitchens, a simple cost effective solution is to fit an extractor fan. These low power devices use minimal electricity and remove the humid air to where it belongs, outside!
If it’s not possible to install an extractor fan then get into the habit of using a dehumidifier or opening windows to give good ventilation.
If external walls are the main cause of your damp or mold check to see if the stone or render is sealed properly.
R.A & Sons Manufacturing Ltd ( https://rasonsltd.com ) have an array of products to use externally from breathable stone sealers to high performance paints and renders that are specially formulated to tackle damp areas.
Whilst every effort has been taken to confirm the accuracy of the information presented in this article, R.A. & Sons Ltd and R.A. & Sons Manufacturing Ltd cannot be held responsible for errors and / or omissions or for any direct or indirect consequences resulting from the use and application of its products.
The company expressly disclaims any and all liability as to any results obtained or arising from any use of its products or reliance on such information; no warranty of fitness for any particular purpose or any other warranty, expressed or implied, is made concerning the goods described or the information provided herein.
If you have any questions please contact us here.