Ramod Moulding Plaster

Brand: RA&Sons

RAMOD MOULDING PLASTER is a premixed lime based moulding plaster that can be used both internally and externally. It is specifically formulated with fibres and special additives to make it a strong low shrinkage material, perfect for repairing stone cornices, capitals, columns or any other stone profiles. It conforms to the European standard UNI EN 998-1 making it ideal for the restoration of historical buildings in conservation areas. It is light brown in colour but other shades are available on request.

Surface Preparation

All stone surfaces should be clean, dry and dust free. Any surface contaminants like grease, oil and efflorescence must be removed in order to promote adhesion.



RAMOD MOULDING PLASTER should be mixed with a mechanical paddle mixer to achieve a smooth lump free consistency. Mix in a clean bucket using approximately 6 litres of clean water per 25kg bag. Allow the mixture to stand for 5 minutes and then re-mix thoroughly before application. Wet the substrate first to aid adhesion and apply with a metal or stainless steel trowel to a thickness of no more than 20mm. When additional coats are required to build up a profile do not allow the base coat to dry completely before applying further coats, this aids adhesion.




  • To a depth of over 20mm
  • At temperatures below =5°C and over +35°C, in strong windy conditions or in direct hot sunlight
  • Do not dilute the product at any stage



Low Shrinkage Moulding Plaster For Restoration

Packaging & Storage

RAMOD is available in 25Kg bags and can be stored in a cool dry place up to 12 months, in its original unopened packaging

Safety Notice

Before using RAMOD it is recommended to consult the product safety data sheet available on request

Technical Data

Light Brown (Others on Request)
Coverage (Theoretical)
14[Kg/m²] per 1cm thickness
Mixture Water Content
Pot Life
3-4 Hours
Compression Strength After 28 Days
Conforming to Cat. CS I
Adhesion on Bricks
>0.8[N/mm²] - Mpa
Crack Type
Permeability to Vapour
Water Absorption
Fire Resistance
According to Class A1
Thermal Conductivity
0.34 [W/mK]
The data and statements in this information sheet refer to laboratory tests in our possession, conducted in standard environmental conditions. Practical applications on site according to these conditions of use may result in different data readings. Due to the wide variety of possible uses and applications, the end-users should independently determine the suitability of the material for their specific purpose prior to use. R.A. & SONS Manufacturing Ltd. reserves the right to make technical modifications of any kind without prior notice.

Other Products

© Copyright RA & Sons Ltd 2024