Brand: RA&Sons

RAGROUT is a specially formulated waterproof tile grout made up of special polymers, additives and pigments enabling the grout to be used both internally and externally. With the addition of RALASTOCEM it can be used in swimming pools. It comes in 15 popular colours and is suitable for tile joints of 1-5mm. (For joints of 6-15mm simply add calcium carbonate).


RAGROUT powder is to be mixed with 30-35% water by weight in a clean container. Mix mechanically until a smooth until a smooth homogeneous lump free mixture is achieved. Let the grout stand for 5 minutes and mix again thoroughly. Even though RAGROUT is waterproof when it’s used in swimming pools, wet rooms or areas that experience heavy foot traffic combined with sudden changes in temperature mix RAGROUT with RALASTOCEM to improve elasticity and impermeability. For joints from 6-15mm add 1.2 Kg of calcium carbonate 300mic to 5 Kg of RAGROUT. Always apply RAGROUT with a rubber grouting tool. When removing excess grout use a damp sponge or cloth and never wet the areas excessively. Floors can take foot traffic after 24 hours and the grout will be fully cured after 5-7 days.



Do not use RAGROUT :

  • When temperatures are below +5°C and over +35°C


Elastic Cement Mortar For Grouting

Packaging & Storage

RAGROUT is supplied in 5Kg buckets and can be stored up to 12 months in a cool dry place, in its original unopened packaging

Safety Notice

Before using RAGROUT it is recommended to consult the product safety data sheet available on request.

Technical Data

Fine Powder
Colours Available
Apparent Density
1300-1400 Kg/m³
Mixture Density
1900 Kg/m³
Mixture Open Time/Pot Life
2 Hours Approx
Application Temperature
From +5°C to +35°C
Flexural Strength After 28 Days
As per EN 12808-3
Moisture Resistance
Abrasion Resistance
Aging Resistance
Temperature Resistance
From -10°C to +70°C
The data and statements in this information sheet refer to laboratory tests in our possession, conducted in standard environmental conditions. Practical applications on site according to these conditions of use may result in different data readings. Due to the wide variety of possible uses and applications, the end-users should independently determine the suitability of the material for their specific purpose prior to use. R.A. & SONS Manufacturing Ltd. reserves the right to make technical modifications of any kind without prior notice.

Other Products

© Copyright RA & Sons Ltd 2024