Brand: RA&Sons

GRAFFIATO is a ready mixed specially formulated durable UV-resistant acrylic render. It can be applied externally over a variety of substrates and is available in 300 colours.

Surface Preparation

Any areas of mold or algae should be pretreated with RASAN, the substrate should then receive one coat of RACOAT ACRYLIC PRIMER diluted with 10% of water. Allow to dry for 12 hours.



Apply GRAFFIATO with a steel trowel to a uniform depth of 2mm. While the product is curing but before it dries use a plastic finish trowel in an up and down motion to give a textured finish. Make sure all tools are cleaned thoroughly with water after use.



Do not use GRAFFIATO:

  • At temperatures below +8°C or above +30°C
  • When strong wind or rain is forecast or when there is high humidity expected.

Once the render has been applied, the surface must be protected from rainfall for at least 48 hours,

High Thickness Acrylic Graffiato

Packaging & Storage

GRAFFIATO is supplied in 25Kg buckets and can be stored up to 6 months in a cool dry place, in its original unopened packaging

Safety Notice

Before using GRAFFIATO it is recommended to consult the product safety data sheet, available on request

Technical Data

1.78 Kg/L
Binding Agent
Acrylic Copolymer
White or Colour Chart (300 colours)
Ready to Use
Coverage [theoretical]
Min. Reticulation Temperature
Volume Solid Content
84% approx
VOC According to dir 2004/42/CE cat.A/c Exterior Walls of Mineral Substrate
Impact Resistance
Category III
Permeability to Water Vapour
V = 70 (g/m²)d
Water Permeability
W = 1.40(Kg/m²)h½ - (Class II)
The data and statements in this information sheet refer to laboratory tests in our possession, conducted in standard environmental conditions. Practical applications on site according to these conditions of use may result in different data readings. Due to the wide variety of possible uses and applications, the end-users should independently determine the suitability of the material for their specific purpose prior to use. R.A. & SONS Manufacturing Ltd. reserves the right to make technical modifications of any kind without prior notice.

Other Products

© Copyright RA & Sons Ltd 2024