RA&Sons Logo
PRODUCT

Rabond Flex (C2T) 

rabond 1 new
Brand: RA&Sons
RABOND FLEX is a high-performance, cementitious tile adhesive with enhanced flexibility and superior slip resistance, making it ideal for both interior and exterior applications. Classified as C2T under UNI EN 12004, it offers improved adhesion strength and reduced vertical slip, ensuring secure and long-lasting tile installation.
Formulated with cement, graded sands, and specialized polymers and additives, RABOND FLEX is particularly suited for low-absorption single-fired tiles, marble, granite, natural stone, and porcelain gres. It is available in white and grey to match various tiling applications. RABOND FLEX provides reliable performance on both walls and floors, delivering exceptional stability in demanding environments.

Surface Preparation

The surface to be tiled must be completely sound and clean, dry and dust free. Any surface contaminants like grease, oil and efflorescence must be removed in order to promote adhesion.

 

Application

RABOND FLEX should be mixed with a mechanical paddle mixer on a low speed setting to achieve a smooth and lump free consistency. Mix in a clean bucket using approximately 7-8 litres of clean water per 25Kg bag. Allow the mixture to stand for 5-6 minutes and then remix thoroughly before application. Use a notched trowel to apply the adhesive. Curing time is approximately 4-5 hours.

 

Recommendations

Do not use RABOND FLEX

  • On surfaces that are wet
  • When temperatures are below +5°C and over +35°C
  • With underfloor heating

Class C2T Tile Adhesive For Low Absorption Surfaces

Packaging & Storage

RABOND FLEX is supplied in 25Kg bags and can be stored up to 12 months in a cool dry place, in its original unopened packaging

Safety Notice

Before using RABOND FLEX it is recommended to consult the product safety data sheet available on request

Technical Data

Density
1350 [Kg/m³]
Granulometry
<0.6mm (600µ)
Colour
White and Grey
Water To Be Mixed
30% Approx
Coverage (Theoretical)
4-5 [Kg/m²]
pH
>12
Full Cure
5 Days Approx
Time to Wait Prior to Fill The Grouts
48 Hours
Pot Life
4-5 Hours Approx
Adjustability Time
30 Mins Approx
UNI EN 12004
Class C2T
Initial Tension Adhesion Strength
>1.0 [N/mm²]Mpa
Tension Adhesion Strength After Heat Aging
>1.0 [N/mm²]Mpa
Tension Adhesion Strength After Water Contact
>1.0 [N/mm²]Mpa
Tension Adhesion Strength After Freeze/Thaw Cycles
>1.0 [N/mm²]Mpa
Open Time
20 Minutes
The data and statements in this information sheet refer to laboratory tests in our possession, conducted in standard environmental conditions. Practical applications on site according to these conditions of use may result in different data readings. Due to the wide variety of possible uses and applications, the end-users should independently determine the suitability of the material for their specific purpose prior to use. R.A. & SONS Manufacturing Ltd. reserves the right to make technical modifications of any kind without prior notice.

Other Products

© Copyright RA & Sons Ltd 2025